Walky square bollard

All Walky Overview Lighting Effects Application Imagery Product Details Codes & Downloads

All Walky

Lighting Effects

Application imagery for Walky square bollard

Product Details

Lighting system for walkways designed for use with LED light sources to ensure high visual comfort.
Bollard installation.
Comprising an optical compartment with IP66 protection rating and bollard to be ordered separately.
Optical compartment and bollard in aluminium alloy with powder paint coating treatment to ensure high resistance to atmospheric agents and UV rays. Plastic closure casing in the rear part of the optical compartment.
Complete with plastic cable gland and output cable 0.5 - 1 m long
Tempered frosted sodium-calcium safety glass.
Optical compartment mounted on bollard by means of a single torxtype stainless steel screw (safety type).
The bollard itself houses two stainless steel rods secured to the base, ensuring the product has high resistance to impacts.
The bollard is anchored to the ground by means of a galvanized and painted steel mounting base.
The bollard can be secured to the ground/paving using anchoring pads (on paving) or a mounting base and counter-plate with clamps fi nished with Dakromet, ensuring further assurances against corrosion (to be ordered separately).
Walky optical compartment with built-in 220 ÷ 240Vac On-Off or 24Vdc remote power supply.
On-Off, Dali, IP67 power supplies are available for 24Vdc versions to be ordered separately.
Bollards are available with IP66 220 ÷ 240Vac built-in power supply for 24Vdc Walky versions (ø100, 90x90 and 270x90mm).
Protection against over-voltages (220 ÷ 240Vac versions): 2kV in Common Mode (CM), 1kV in Differential Mode (DM).
Ambient operating temperature: Ta -30°C +50°C for 24Vdc versions, Ta -20°C +50°C for 220-240Vac (On-Off) versions.
All external screws used are in A2 stainless steel.

Colours available for Walky square bollard

01 White
04 Black
15 Grey
F5 Rust brown

Do you want to know more?

Click to access our Contact Us page where you can send us an enquiry.

Make Enquiry

5 year product warranty included

Discover more

Walky square bollard 13 code(s)

180x180

	lm system	W system	Optic	K	CRI	Control	Size (mm)	Code
New	445.5	11.5	AL	4000	80	On/off	180x180x45	EI31 *
New	418.5	11.5	AL	3000	80		180x180x45	EI32
New	405	11.5	AL	2700	80		180x180x45	EI33

To be installed on X440 bollard (h900)
* = On request. For further details please contact your iGuzzini representative, or send us your enquiry.

90x90

	lm system	W system	Optic	K	CRI	Control	Size (mm)	Code
New	119.7	4.6	AL	4000	80	PWM	90x90x36	EI34 *
New	111.3	4.6	AL	3000	80	PWM	36x90x90	EI35
New	107.1	4.6	AL	2700	80	PWM	90x90x36	EI36

To be installed on X441 bollard (h600, without power supply) or on X442 bollard (h600, complete with power supply)
* = On request. For further details please contact your iGuzzini representative, or send us your enquiry.

45x45

	lm system	W system	Optic	K	CRI	Control	Size (mm)	Code
New	34.2	1.5	AL	4000	80	PWM	38x45x45	EI37 *
New	32.4	1.5	AL	3000	80	PWM	38x45x45	EI38
New	30.6	1.5	AL	2700	80	PWM	38x45x45	EI39

To be installed on X443 bollard (h400)
24Vdc. Power supply to be ordered separately
* = On request. For further details please contact your iGuzzini representative, or send us your enquiry.

H400 bollard for 45x45 optical assembly

	Short description	Control	Size (mm)	Code
New	Walky 45x45 mm bollard mounting accessory - h = 400 mm		35x57x400	X443

Power supply to be ordered separately.

H600 bollard for 90x90 optical assembly

	Short description	Control	Size (mm)	Code
New	Walky 90x90 mm bollard mounting accessory - h = 600 mm - without power supply		40x110x600	X441
New	Walky 90x90 mm bollard mounting accessory - h = 600 mm - with power supply		40x110x600	X442