Master Pro Evo KNX Konnex

All Wired DALI/KNX Overview Product Details Codes & Downloads

Product Details

This innovative and "intelligent" control system, based on KNX and DALI technologies, allows centralised management of all functions in a building that are otherwise usually controlled separately.
Master Pro Evo offers flexible solutions for all kinds of application; solutions that guarantee comfort, safety and maximum energy savings.

Customized project
iGuzzini's staff of technicians and designers is always on hand to advise optimal configurations of the Master Pro Evo system. Every project is designed taking into account the customer’s specific requirements.

Colours available for Master Pro Evo KNX

00 Indeterminate
01 White
04 Black

Do you want to know more?

Click to access our Contact Us page where you can send us an enquiry.

Make Enquiry

5 year product warranty included

Discover more

Filter codes by:

Master Pro Evo KNX 39 code(s)

	Short description	Control	Size (mm)	Code
New	KNX Ambient Controller touch 2.8"	KNX	71x71x30	Q737

	Short description	Control	Size (mm)	Code
New	KNX 1-4 channels button	KNX	71x71	Q743

	Short description	Control	Size (mm)	Code
New	KNX / DALI-2 64 Gateway	KNX	65x72x90	PC68

The DALI gateway connects the KNX protocol to the DALI
interface digital electronic devices.
Up to a maximum of 64 addresses can be controlled and
adjusted.

	Short description	Control	Size (mm)	Code
New	Power supply for KNX BUS - 320 mA	KNX		MH93

A module adapted to generate the bus voltage required to power a line of devices.
Current: 320 mA

	Short description	Control	Size (mm)	Code
New	Power supply for KNX BUS - 640 mA	KNX		MI56

A module adapted to generate the bus voltage required to power a line of devices.
Current: 640 mA

	Short description	Control	Size (mm)	Code
New	KNX Coupler/Isolator	KNX		MH94

For the logic connection and electrically isolating lines and areas.

	Short description	Control	Size (mm)	Code
New	Power supply 24V DC / 0.4 A	On/off		MI57

Device with integrated overload or short circuit protection fitted
on the DIN EN5022 profile and adapted to provide an auxiliary
power supply to the KNX components.

	Short description	Control	Size (mm)	Code
New	USB-KNX interface	KNX		MH96

For connecting a programming or diagnostic device to the bus
line via a USB1.1 or USB2 interface.

	Short description	Control	Size (mm)	Code
New	Router KNX/IP	KNX	86x18x100	MH98

The KNX/IP routers can also forward telegrams between lines
using the LAN (IP) as a rapid backbone.

	Short description	Control	Size (mm)	Code
New	DALI Booster 64	DALI	96x72x62	G745

	Short description	Control	Size (mm)	Code
New	Multi-protocol Logic Controller	KNX		M618

	Short description	Control	Size (mm)	Code
New	Logic controller for KNX systems	KNX	58x52x90	PY68

	Short description	Control	Size (mm)	Code
New	Key interface, 2 channels	KNX		MI02

This generates an internal signal voltage that connects two
conventional buttons or floating contacts as well as connecting
two low current LEDs.

	Short description	Control	Size (mm)	Code
New	Control switch interface, 4-gang	KNX		MI03

This generates an internal signal voltage that connects four
conventional buttons or floating contacts as well as connecting
four low current LEDs.

	Short description	Control	Size (mm)	Code
New	4x binary input (10 V)	KNX		MI04

For connecting four conventional buttons or potential free
contacts. It generates an SELV signal voltage internally that is
electrically isolated by the bus.

	Short description	Control	Size (mm)	Code
New	8x binary input (10 V)	KNX		MI05

For connecting eight conventional buttons or potential free
contacts. It generates an SELV signal voltage internally that is
electrically isolated by the bus.

	Short description	Control	Size (mm)	Code
New	4x binary input (24V)	KNX		MI06

For connecting four inputs with a voltage of 24 V AC/DC.
With an integrated bus coupler and life-connected terminals.

	Short description	Control	Size (mm)	Code
New	8x binary input (24 V)	KNX		MI07

For connecting eight inputs with a voltage of 24 V AC/DC.

	Short description	Control	Size (mm)	Code
New	4x binary input (230 V)	KNX		MI08

For connecting four inputs with a voltage of 230 V AC.
With an integrated bus coupler and life-connected terminals.

	Short description	Control	Size (mm)	Code
New	8x binary input (230 V)	KNX		MI09

For connecting eight inputs with a voltage of 230 V AC.
With an integrated bus coupler and life-connected terminals.

	Short description	Control	Size (mm)	Code
New	Annual timer 4-gang 324-mem DCF77	KNX		MI16

Annual four-channel timer with a power feed unit and integrated
DCF receiver.
To be integrated with the DCF-77 antenna for radio controlled
timing synchronisation. Time and date view option on the bus.
The device can be programmed manually or via a PC with the
appropriate software.

	Short description	Control	Size (mm)	Code
New	DCF77 antenna	KNX		MI17

Antenna for receiving the time via a time signal. The antenna can
be connected to an annual programmer REG‑K/4/324 DCF‑77.

	Short description	Control	Size (mm)	Code
New	KNX mini presence/lux detector and recessed IR receiver.	KNX	ø43x71	PC11

Recessed motion detector and lighting for interiors.

	Short description	Control	Size (mm)	Code
New	KNX Indoor presence sensor - Basic	KNX		MI10

Indoor presence detector

	Short description	Control	Size (mm)	Code
New	KNX Indoor presence sensor with lighting control and Infrared receiver.	KNX		MI11

Indoor presence and Lux detector.
Thanks to the infrared receiver, the individual configurations can be changed via remote control.

	Short description	Control	Size (mm)	Code
New	KNX Indoor movement sensor 180-2.2 m flush-mounted	KNX		MI58

Indoor movement detector with anti-scratch cover.

	Short description	Control	Size (mm)	Code
New	Infrared remote control - 10 channels	KNX		MH95

10 channel infrared remote control

	Short description	Control	Size (mm)	Code
New	KNX light level and temperature sensor	KNX		MI13

The sensor registers the light and temperature and transmits them
to the bus.
It is fitted with a temperature and a light sensor.
Adapted for outer wall assembly.

	Short description	Control	Size (mm)	Code
New	4-Channels weather station	KNX		MI14

The weather station registers and processes analogue sensor
signals indicating wind speed, light, dusk, rainfall and a DCF-77
signal.
It can be fitted to any combination of up to four analogue sensors
plus the combined DCF-77 weather sensor.

	Short description	Control	Size (mm)	Code
New	Combination weather sensor with DCF77	KNX		MI15

The combined weather sensor includes a wind sensor, a rainfall
sensor, a dusk sensor and three light sensors (east, south and
west).
Plus an integrated DCF-77 receiver, a 45° adjustable antenna
and integrated heating.

	Short description	Control	Size (mm)	Code
New	2-gang KNX 16 A actuator	KNX		MI18

A 1-channel actuator with two inputs for assembly in a 60 mm
flush-mount case or in a ceiling-mounted socket with coupling.
The two floating contacts can be connected to two inputs.

	Short description	Control	Size (mm)	Code
New	2x230 V - 16 A switching actuator with manual mode and current detection	KNX		MI19

For controlling two electric loads independently.
The actuator is fitted with a built-in current detector that can
measure current absorption on each channel.
All the outputs can be commanded using manual switches.

	Short description	Control	Size (mm)	Code
New	4x230 V - 16 A switching actuator with manual mode and current detection	KNX		MI20

For controlling four electric loads independently. The actuator is
fitted with a built-in current detector that can measure the load
current on each channel.
All the outputs can be commanded using manual switches.

	Short description	Control	Size (mm)	Code
New	8x230 V - 16 A switching actuator with manual mode and current detection	KNX		MI21

For controlling eight electric loads independently.
The actuator is fitted with a built-in current detector that can
measure the load current on each channel.
All the outputs can be commanded using manual switches.

	Short description	Control	Size (mm)	Code
New	12x230 V - 16 A switching actuator with manual mode and current detection	KNX		MI22

For controlling twelve electric loads independently.
The actuator is fitted with a built-in current detector that can
measure the load current on each channel.
All the outputs can be commanded using manual switches.

	Short description	Control	Size (mm)	Code
New	8x-16x-10 A Venetian blind/switching actuator with manual mode	KNX		MI23

For controlling eight blind/shutter motors independently or for
switching sixteen loads via closure contacts. The blind or switch
channel function can be configured as required. All the blind/
switch outputs can be commanded manually using the buttons
on the front of the device.

	Short description	Control	Size (mm)	Code
New	4x 24 V-6 A Venetian blind actuator with manual mode	KNX		MI24

For controlling four blind/shutter motors independently. The blind
channel function can be configured as required. All the blind
outputs can be commanded manually using the buttons on the
front of the device.

	Short description	Control	Size (mm)	Code
New	2x230 V-300 W universal dimming actuator	KNX		MI25

For controlling and adjusting incandescent lamps and electronic
transformers.

	Short description	Control	Size (mm)	Code
New	Control unit 0-10V 3-gang with manual mode	KNX		MI27

For connecting devices with a 0-10 V KNX systems interface.
With an integrated bus coupler and life terminals (230 V) or
life-connected terminals (0-10 V). Each individual 230 V switch
output can be controlled manually with a switch.

Search

Your search returned no results

Code Finder

Master Pro Evo KNX

Product Details

Colours available for Master Pro Evo KNX

Do you want to know more?

5 year product warranty included

The Wired DALI/KNX Line

Search

Your search returned no results

Code Finder

Product Details

Colours available for Master Pro Evo KNX

Do you want to know more?

5 year product warranty included

The Wired DALI/KNX Line

Sign in

Not yet registered?