filter search
English - United States flag It looks like you're in North America.

Suche nach Code

Nutze die Filter, um aus unserem Produktsortiment den richtigen Code zu finden.

Code zu finden
Code Finder

BT32

Updating Product Data...

Photometric configuration only available on screens above 1024px
This product is suitable for Asia - Pacific market only

Mini Linear Recessed Luminaire - Neutral White LEDs - 48V dc - L=1044mm - Wall Grazing Optic - 28.4W 1388.9lm - 4000K

Produkt Information

  • Material: Aluminium stranggepresst
  • Abm. (mm): 1044x55x74

Verfügbare Farben

Lighting parameters

Electrical parameters

  • Dimmbare Elektronisch Versorgungseinheit nicht enthalten
  • Dimmung: PWM
  • N° optische Kompartimente: 1
  • Betrieblicher Umgebungstemperaturbereich: da -30°C a 50°C.
  • Power Factor: Sehen Montageanleitung

Technical Specifications

Informationen zur Installation

  • Einrichtung: Ground- and wall-recessed using the outer casing, to be ordered separately. For ground installation a drainage channel must be created or gravel inserted for drainage under the outer casing before installation, to guarantee the degree of protection stated. For ceiling-mounting with plasterboard panels (1-30 mm thick), make the preparation openings as indicated in the instructions sheet and use the accessory with code X013 (kit containing steel cables with reinforcement plates).
  • Verkabelung: Equipped with a 48V dc electronic circuit fitted inside the device. 48V dc electronic ballasts to be ordered separately. For the electrical connection the product has a lower box holding two quick coupling terminals (3-pole, max. 4 mm2) and double cable glands for pass-through wiring.
Zubehör (9)
  • 5925

    Stahlseil L=250 zur Wandmontage
    • 00 Neutral
  • X013

    Kit mit Stahlseilen mit Verstärkungsplatten zur Zwischendeckenmontage - L=570 - für LED einfarbig dimmbar PWM
    • 00 Neutral
  • BZZ2

    Gehäuse für dimmbare Einbaumodule DMX, RGB, RGBW, WNC - L=1044
    Abm. (mm): 1037x118x100
    • 00 Neutral
  • PC12

    Vorschaltgerät mit Gleichstrom nicht dimmbar DIN 120W - VIN = 88-264VAC 47/63Hz Vout = 48V-55V IMAX = 2,5A
    Abm. (mm): 114x40x125
    • 00 Neutral
  • PC13

    Vorschaltgerät mit Gleichstrom nicht dimmbar BARRA DIN 240W - VIN = 88-264VAC 47/63Hz Vout = 48V-55V IMAX = 5A
    Abm. (mm): 114x63x125
    • 00 Neutral
  • PC14

    Versorgungseinheit mit Gleichspannung nicht dimmbar BARRA DIN 480W - VIN = 90-264VAC 47/63Hz Vout = 48V-55V IMAX = 10A
    Abm. (mm): 114x86x125
    • 00 Neutral
  • BZN7

    5-poliger Y-Stecker IP68 - Für die Verbindung zwischen DMX- oder DALI- Signalkabel und Zuleitungskabel
    • 00 Neutral
  • BZQ7

    Abschlussteil für Verbinder + Abschlusswiderstand von 120 Ω
    • 00 Neutral
  • BZS6

    5-poliger Stecker IP68
    • 04 Schwarz