Cylindrical pole with shank - buried / with plate

All Cylindrical pole Overview Product Details

All Cylindrical pole

Product Details

Poles made of 70 micron hot-dip galvanised EN10025- S235JR or EN10025-S355JR steel in compliance with the UNI EN ISO 1461 (EN40-5) standard.
The poles are subjected to a hot-dip galvanisation process followed by a pre-treatment for removing organic contaminants.
A chemical treatment is then applied to create the correct level of adhesion for the next phase of powder coating followed by a phase of polymerisation in a ventilated oven to ensure the curing process for the paint film is complete.
The treatment and painting cycle guarantees a C4-H durability class in compliance with the UNI EN ISO 12944 standard.
Treatment and paint cycles with a durability class of C5-H are available on request.
Cylindrical shape with a diameter of ø 76 mm (shank ø 60 mm), ø 102 mm (shank ø 76 mm), ø 120 mm (shank ø 102 mm).
The buried poles are fitted with a slot for feeding in cables (150x150mm).
Anchor plate for poles with a 70 micron hot-dip galvanised steel plate with 4 slots.
Counterplate and anchoring bolts need to be ordered separately.
Class II terminal block with single or double fuse holder, four poles with three connections each; and 6 to 16 mm2 input and 2.5 mm2 output cables to be ordered separately (codes 1862 - 1863 - 1864 - 1865).
Terminal blocks code 1862-1864-1865 are IP43 | IK08; terminal blocks code 1863 is IP44 | IK08.
Poles with an IP54 “patch” access cover (132x38mm and 186x45mm) are earthed outside the base of the pole.
Poles with an IP44 flush access cover (310x95mm) are earthed inside.